Enough of the technical jargon......Now, how do you use CB radio?

On the CB there are several terms used. Most are used on 27MHz CB however, only some 10 codes are used on UHF.

The following codes are commonly used, the blue ones more common than others

Code

Meaning

10-1
10-4
10-7
10-8
10-9
10-10
10-20
10-100
Receiving Poorly
Received
Out of Service, Leaving Air (you're going off the air)
In Service, subject to call (you're back on the air)
Please repeat
Transmission Completed, Standing By (you'll be listening)
Location, 'What's your 10-20?'
Toilet/bath/restroom, 'I'm going 10-100'

Here is a fuller list of CB codes.

*E.O.S. = Emergency Operator Station
*E.O.C. = Emergency Operators Center

Q-codes are used in many kinds of radio communications, including CB sideband but not typically on CB AM. (If your radio doesn't have sideband, don't worry about Q-codes.) Q-codes originated with amateur radio but their use in CB, even more so than 10-codes, can vary depending on who published the list.

The following is an abbreviated list of Q-codes borrowed from amateur radio:

Possible uses of the codes:

Going QRT Switching off now
Receiving QRM I'm getting interference from another station
Having QRN trouble Having static trouble.
That was a quick QSO! That was a quick chat!
QSY to channel... Go to channel...
CQDX CQDX... Seek you long distance, seek you long distance.
What's your QTH What's your location?

On SSB it sometimes becomes difficult to understand skip stations or low down stations, but on AM it isn't. So when radio communications started up they invented the Phonetic alphabet.


Return to home Best view with 1024x768 resolution ©2003-2006  RedFox AKA Fluffy Last edit: 31.10.2006 03:39:22 +1000

Используются технологии uCoz